Inductive proximity sensors detect metal targets; magnetic sensors detect magnetic targets; and capacitive sensors detect non-metallic targets such as glass, plastic and wood.

Actuator position sensors detect end-of-stroke position in cylinders, rising stem valves and quarter-turn valves.

Photoelectrics include infrared sensors for position sensing; laser sensors for long-range object detection; and fiber optics for limited space applications.

Object evaluation solutions include the 3D image sensor that measures shape, size and volume; the efector dualis inspection sensor for error-proofing; and the efector PMD sensor with a 10-meter sensing

Capacitive proximity sensors sense the position of non-metallic targets such as glass, plastic, paper and wood.

Quick disconnect cordsets and field wireable connectors offer plug-and-play functionality for electrical wiring.

Position sensors and object evaluation systems are a key component of industrial controls for position feedback on automation machinery.

Point level and continuous level sensors detect the level of liquids, powders and plastics directly in the medium or mounted to a sight glass.

Flow sensors detect the flow rate of liquids and gases; flow meters simultaneously monitor flow rate, fluid temperature and volume.

Pressure sensors and vacuum sensors monitor system pressure in hydraulic, pneumatic and process applications. Compact housings feature integrated displays with pushbutton setup.

Temperature sensors monitor the process temperature of liquids and gases. Temperature sensors features integrated displays and modular mounting for application flexibility.

efector Octavis sensor monitors a machine’s operating condition via vibration analysis.

Valve sensors detect the open and closed position of rising stem valves, pneumatic cylinders and quarter-turn valves.

Fluid sensors and diagnostic systems provide feedback on the status of process parameters such as pressure, flow, temperature, level, valve position, and vibration.

Networking and controls are designed to monitor the performance of vehicles used in off-road applications and to network binary devices using a 2-wire cable.

The Actuator Sensor-interface networking system is a simple, two-wire solution for networking actuators and sensors. Ideal technology for reducing wiring costs on machines.

Control systems for mobile vehicles include controllers, robust I/O modules, HMI displays, CMOS-based camera systems, and position sensors that monitor tilt, pressure and position.

Quick disconnect cordsets and field wireable connectors offer plug-and-play functionality for electrical wiring.

Speed monitors indicate over-, under- and zero-speed conditions. Power supplies provide voltage for sensors, controllers and supply loads.

ifm efector’s RFID system is designed for “closed loop” manufacturing applications that include pallet tracking, component identification, intelligent part routing and assembly verification.

The Multi-Code Reader provides reliable identification of 2D data matrix codes 1D barcodes in high-speed industrial automation applications.

Identification products include ifm’s RFID system for “closed loop” manufacturing applications and the Multi-Code Reader for 2D data matrix and barcode identification.

Safety connection technology includes inductive safety sensors; a multi-function safety relay; safety light curtains and grids to protect plant personnel; and the Safety at Work system.

Safety light curtains offer area height protection of 160mm to 1510mm in intervals of 150mm and meet Type 2 and Type 4 IEC 61496 standards. Light grids are available in 2, 3 and 4-beam versions.

Safety at Work uses the standard AS-i protocol, which provides the backbone for a system to transmit safety-related information. Dynamic code sequences (8x4-bit data sequence) are stored in every safety module.

Safety sensors with non-contact inductive sensing principle do not rely on a coded magnet or key target for safe operation. Multi-function safety rely is compatible with multiple safety devices.